What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 01:00
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
How can I plan a zero-waste vacation without compromising on comfort?
Here is a simplified AC power diagram.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
but this device (an Inductor) … impedes the rapid changes in the current.
nine
so, what happens?
2024–10–10[John johnson John Johnson ]
What is your interpretation of the movie Rocky? What makes it a good film in your opinion?
Because the load is inductive, the current lags the voltage.(by a bit).
At one ohm, the resistor has a maximum of 1 watt power.
The bolt then partially travels down the line to your home.
Why are Republican politicians so afraid to oppose Trump?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is 'the assistant's answer'
‘Uber for Getting Off Antidepressants’ Launches in the US - WIRED
but I think this circuit , shows a few more pieces.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What is lightning?
Montana warns of new disease-carrying tick species in the state - KREM
The MOV will conduct when the voltage exceeds 50% of line voltage.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Upvotes:
These are simplified answers to the original question, and does not change anything I wrote above.
Why is my hair dry but greasy at the same time and falling out? What can I do about it?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
But it can get overloaded, and no longer works.
There are three different concepts here that are getting confused.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The third is lightning and “how it gets conducted into a home.”
He then describes Rainy Season and Lightning.
How do modern fantasy authors approach diversity differently than previous generations?
Now when you have a certain ac resistance, then a current flows in a loop.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Horoscope for Sunday, June 22, 2025 - Chicago Sun-Times
eight
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
How are interior designers using AI tools to personalize home design experiences?
a photo is worth a thousand words.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This one hit behind the barn.
He then describes the function of a fuse.
2024–10–16 [ OO OLAOYE OYEBODE ]
[old diagram got deleted by accident]
I post the exact comment here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–14 [Omar Gharbi Omar Gharbi ]
What does a fuse do?
A fuse is a non-resetable over current circuit protector.
[image of Common-mode choke]
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
(Dc diagram shown, AC is similar).
This is where the MOV conducts again, and dissipated the energy.
The other is “what does a “fuse” do?”
First Sentence:
He then asserts :
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Barnstars:
This is where this question deviates from being a 'generic' question, and becomes more specific.
In schematic diagrams this is the symbol for a fuse:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
An AC voltage/ current source, and an ac inductive load.
A circuit breaker is similar, but is resettable.
This device then solves the entire problem.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There are two important concepts here.
One is “what exactly is in a ‘surge protector’ ? ”
One
what exactly is a ‘surge’ protector?
Edit 2024–10.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These devices are installed between the “hot” and “neutral” and protective ground.
At least they know the answer if they wanted it.
the problem then depends on "how fast does the fuse operate?".
It also is a device that limits the change in current flow.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But… the neutral is now “floating” because of the 1 ohm resistance.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”